EDAC 320
The EDAC 320 is a cost effective, cellular based remote monitoring control and logging system. Based off the tried and true EDAC SMS 300 series product the EDAC 320 integrates all of the features of the SMS 300 as well as adding some new ones.

The EDAC 320 connects to approved GSM and HSDPA cellular networks, including Telstra Australia's new NextG network, and uses this connection to deliver critical information. The EDAC 320 employs SMS (Short Messaging Service), email via GPRS (General Packet Radio Service) and CSD (Circuit Switched Data) technologies to report and deliver this information.

The EDAC 320 has the ability to monitor up to 8 inputs and send out messages via SMS or email when a predefined alarm or reset condition occurs. The EDAC 320’s inputs can accept either digital, 4-20mA analog or 0-5V analog inputs.

The EDAC 320 also has four integrated relay outputs which can be used to control various pieces of equipment. Any of the outputs can be switched either remotely via a user sending an SMS or email to the unit with the command, or automatically depending on the state of an input (i.e. low temperature detected, turn heating on). Notification of outputs switching can be sent to any of the EDC 320’s sixteen different programmable contact slots.

Information from any of the EDAC 320’s inputs and outputs can be recorded to an onboard flash memory card, where it can be retrieved and viewed either locally or remotely via cellular networks at any time. This information can be useful for monitoring the performance of systems and equipment, recording/reporting of system faults as well as recording/logging of information for compliance in processing or resource allocation.

Like its brother the SMS 300, the EDAC 320 is sturdily constructed and enclosed in an extruded aluminium case ensuring maximum ruggedness and reliability.