PB20

The PB20 is designed to be used with EDAC products. The unit produces a continuous output of 13.8V DC at loads up to 4A. During mains fail the internal battery can maintain operation for periods from one hour upwards depending on load. The 13.8V output is electrically regulated, providing a constant voltage over the 0 to 4A output current range and providing standby charging of the battery.

Features

Continuous output of 13.8V DC
Internal battery backup
Electrical regulation of output voltage
Standby battery charging
Compatible with EDAC products
Load regulation of ±0.5%
Low ripple (less than 120mV p-p)
Overload and over voltage protection
Wide temperature range (-10 to +60°C)
High MTBF (589.7k hours minimum)
Alarm outputs for "Mains Fail" and "Battery Critical"
TTL logic signaling for alarm outputs

Specifications

Input: 90-264 VAC, 47-63Hz
Output: 13.8VDC, 2.8A Continuous, 50W
Battery Backup: Maintenance-free sealed lead-acid, 12V, 5.0Ah
Load Regulation: ±0.5%
Ripple: <120mV p-p (max)
Protection: Overload (105-150% of rated output power), over voltage (hiccup mode)
Ambient Temperature: -10 to +60°C
MTBF: 589.7k hours minimum
Alarm Outputs: "Mains Fail" and "Battery Critical" (TTL logic signalling)

To learn more about the PB20, click the button to download the full manual.

Read a Case Study

EDAC 222-02

2 input, 2 output auto alarm dialler, 16 numbers, voice and numeric paging.

Button
EDAC 400-02

12 Volt auto alarm dialler, 4 configurable inputs & outputs (inputs digital only), 16 numbers, voice, numeric & alpha-numeric paging.

Button
EDAC 400-24

24 Volt 4 configurable inputs & outputs (inputs digital only), 16 numbers, voice, numeric & alpha-numeric paging.

Button
EDAC 700-RTU

20 input and output auto alarm dialler programmable as either input or output (digital or analogue). Roster, time frame and call list functionality. Alpha-numeric paging capable.

Button
EDAC 720-DE

32 bit digital input, pulse counting and runtime meter expansion unit for the EDAC 700-RTU.

Button
OffTrac Remote Monitoring & Reporting System

Cost effective and low maintenance, this monitoring device sends SMS text alerts and emails to key personnel, whenever it falls outside of its pre-programmed parameters. www.offtrac.co.nz

Button
EDAC 315-4G

8 Input, 4 output SMS Controller. Inputs configurable to digital, 4-20mA or 0-5V. RS232 programmable. Up to 16 users. Data logging to SD card.

Available for Spark or Vodafone networks.

Button
EDAC 320-4G & 321-4G

8 input, 4 output SMS controller. Inputs configurable to digital, 4-20mA or 0-5V. RS232 programmable, up to 16 users. Alarm messages forwarded to email & cell phones. Data logging to SD card. Pulse counting options.

Available for Spark or Vodafone networks.

Button
PB12

13.8VDC 2.8A power supply with battery backup. Includes 1.2Ah battery. Suitable for use with the 222-02 and 400-02 diallers.

Button
PB20

The PB20 is designed to be used with EDAC products. The unit produces a continuous output of 13.8V DC at loads up to 4A. During mains fail the internal battery can maintain operation for periods from one hour upwards depending on load. The 13.8V output is electrically regulated, providing a constant voltage over the 0 to 4A output current range and providing standby charging of the battery.

Button
Accessories

Antennas, mount bases for antenna kits, additional enclosures, din rail mount power supplies, power supplies with battery chargers and SD cards. Please contact us for a full range of options.

Button